ELNEC Beeprog Universal Eprom Programming System
Product Details:
| Brand Name | AUTOSVS |
|---|---|
| Place of Origin | Guangdong, China (Mainland) |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 Piece/Pieces www.store.autosvs.com |
|---|---|
| Packaging Details: | BOX |
| Delivery Time: | After receiving full payment |
| Payment Terms: | T/T,Western Union,MoneyGram,Paypal |
| Supply Ability: | 500 Piece/Pieces per Month By TNT&DHL |
Detailed Product Description
ELNEC Beeprog Universal Eprom Programming SystemUsage examples:
--- BeeProg is the first des USB-compatible universal programmer by ELNEC. This way, all devices in DIL-shape up to 48 pins can be programmed without additional adapters.
Functions
--- BeeProg is the first des USB-compatible universal programmer by ELNEC, supporting Windows® 95/98/Me/NT/2000/XP.
--- Programming is extremely fast because of using the new hardware on FPGA-b. 48 universal pin-drivers set peaks pull-up/pull-down-modes, clock, vcc, ground and programming power.
--- This way, all devices in DIL-shape up to 48 pins can be programmed without additional adapters.
Features & Specifications:
--- The BeeProg can be connected with pc. AT-386-486-Pentium®-PS/2-Portable and notebooks by the USB-port (2.0) or parallel-port (IEEE1284).
--- The BeeProg also can do In-Circuit-Programming (the ISP-cabel is included). When connecting a device, the BeeProg checks if it is connected correctly and if all pins have good contact.
--- Internal security mechanisms prevent destruction of the device under any conditions
.
Short description:
--- 29278 supported devices by 2.35 version of SW (Feb. 08, 2007) extremely fast programming, one of the fastest programmers in this category.
--- Programs 16-Mbit Flash memory less than 18 seconds 48-pins powerful pindrivers, no adapter required for any DIL devices connector for in-circuit programming (ISP) dual connection to PC: USB or parallel (printer) port USB 2.0/1.1 compatible interface
alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP/2003/XPx64 compatible
--- Multiprogramming possible by attaching more programmers to one PC
approved by CE laboratory to meet CE requirements
Features:
GENERAL
--- First member of new USB-compatible generation of Windows 95/98/ME/NT/2000/XP/2003/XP64 based ELNEC universal programmers built to meet the strong demand of the developers community for the fast and reliable universal programmer.
--- Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module.
--- You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit. BeeProg isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories.
--- Furthermore, it allows generation of user-definable test pattern sequences. Provides very competitive price coupled with excellent hardware design for reliable programming.
--- Probably best "value for money"programmer in this class.
--- Very fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer.
---- At least fast than competitors in this category, for many chips much faster than most competitors. As a result, when used in production this one-socket-programmer waits for an operator, and not the other way round.
--- BeeProg interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers through USB (2.0/1.1) port or any standard parallel (printer) port.
--- Programmer also supports IEEE1284 (ECP/EPP) high-speed parallel port.
--- Support of both USB/LPT port connection gives you the choice to connect the BeeProg programmer to any PC, from latest notebook to older desktop without USB port.
Package Including:
--- Programmer, diagnostic-POD, power supply, pc connection cable, ISP-cable, dust protection cap for ZIF socket, software on cd and manuals.
Device supported:
--- Programmer, in ZIF socket
--- EPROM: NMOS/CMOS, 2708*, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
--- EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 1Gbit, with 8/16 bit data width, full support for LV series
Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
1-Wire E(E)PROM: DS1xxx, DS2xxx
PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE, MAX II
PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx
PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis, Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI
Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49, 87x50 series
Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips LPC series
Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/...
Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny, ATmega series
Microcontrollers Cypress: CY7Cxxxxx, CY8Cxxxxx
Microcontrollers ELAN: EM78Pxxx
Microcontrollers MDT 1xxx and 2xxx series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx, dsPIC series
Microcontrollers Motorola (Freescale): 68HC05, 68HC08, 68HC11, HCS08, HCS12 series
Microcontrollers Myson MTV2xx, 3xx, 4xx and 5xx series
Microcontrollers National: COP8xxx series
Microcontrollers NEC: uPD78Fxxx series
Microcontrollers Novatek: NT68xxx series
Microcontrollers Scenix (Ubicom): SXxxx series
Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx, STR7xx series
Microcontrollers TI: MSP430 and MSC121x series
Microcontrollers ZILOG: Z86/Z89xxx and Z8xxx series
Microcontrollers other: EM Microelectronic, Fujitsu, Goal Semiconductor, Hitachi, Holtek, Princeton, Macronix, Winbond, Infineon(Siemens), Samsung, Toshiba, ...
Programmer, through ISP connector
Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, serial data Flash, PLD configuration memories
Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
Microcontrollers Cypress: CY8C2xxxx
Microcontrollers Elan: EM78Pxxx, EM6xxx series
Microcontrollers EM Microelectronic: 4 and 8 bit series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, PIC24xxx, dsPIC series ..........
Remarks:
--- Shipping Weight: 3kgs
ELNEC Beeprog Universal Eprom Programming System
Other Products from this Supplier
See more
ELNEC Beeprog Universal Eprom Programming System, auto programming tool, OBD2 products from this supplier.
Products
- CAR DVD MP4 [4]
- PROFESSIONAL TOOLS [641]
- TACHO DASH PRO [23]
- KEY PROGRAMMING [62]
- IMMOBILISER [13]
- XOBD TOOLS [4]
- CAR CODE SCANNER [84]
- VAG COM COMPATIABLE [12]
- CARSOFT COMPATIBLE [27]
- ECU CHIP TUNING [29]
- CAR-PC INTERFACES [26]
- ELM32X INTERFACE [9]
- MCU PROGRAMMER [7]
- CHIP PROGRAMMER [57]
- AIRBAG RESETING [6]
- SERVICE LIGHTS RESETTING [25]
- CAR KEYS BLANK [7]
- CAR CABLES ADAPTERS [61]
- Others [40]
Company Info
AUTOSVS TECHNOLOGY CO., LTD.
[China (Mainland)]
[Verified Member]
City: Shenzhen
Province/State: Guangdong
Country/Region : China (Mainland)
Business Type:Manufacturer, Trading Company, Buying Office, Agent, Distributor/Wholesaler
Online Postings: Products




















